AT&T 2wire 2701HG-B Basic DSL Wireless Gateway Setup

[ad_1]

If you've been reading this document, you're probably looking at how to set up your new AT&T 2 Wire DSL router. Throughout this document I have been using a 2wire 2700HG-B wireless router, but this tutorial can even be applied to various routers that provide 2wire AT&T. The first thing to do when organizing your 2 wire DSL router is to plug in all your telephone jacks, the place you recommend the telephone. One of the many DSL filters, it is good to see two filters, such as reading the telephone and DSL / HPNA, DSL / HPNA put a phone line at this port, then run the other end of the telephone line to the phone 2Wire DSL router port again.

After you are connected to the phone line, plug in an Ethernet cable to port 1 of the router, then add another finish to the Ethernet cable on your PC. After connecting the connection between your PC and DSL modem and modem and DSL filter. You can then plug the power adapter into the router, then plug the capability adapter into the wall outlet.

It is best to have a 2Wire DSL router with power, Ethernet and DSL afterwards. Once you see that these lights become inexperienced on your 2 wire router, all you can do is open an online browser similar to Web Explorer. After you open your web browser, you should see a window that looks like the one below. Once you see this window, press the button below, then you should be asked to get it in 2Wire DSL Setup Tool.x.

Once you have installed the 2Wire DSL Setup instrument, simply select the Yes button to open the 2Wire Gateway Authentication display screen A You will need to set the administrative password on your router after authenticating your 2Wire router. For security reasons I suggest setting a password with upper and lower case with few numbers. This password will be useful if you are trying to change the settings on your 2Wine router. To constantly change the router to any setting, just type 192.168.1.254 into your Internet browser.

You then set a password on your router, press the button below to begin registering your 2-wire modem with AT&T A. After your router is registered, read through the agreement and then click the I Agree button. After you accept the agreement with AT&T SBC Yahoo DSL, you will need to create a customer title and password in your DSL account. Enter the land line phone number you received from AT&T to start identifying and managing your new person.

After you create your new username and password, another progress will be displayed, then click the Finish button. After you are almost done, close your current browser and reboot your computer, this can solve any community issues. After you reboot the laptop, you will open the net browser and surf the web together with your AT&T 2 Wire DSL router.

If you came up with port forwarding on your 2-wire router, open a web browser and enter the URL address at 192.168.1.254. Once you click the submit button and the window will appear as follows. The password you just created for your 2Wire router is the one you'll use right now when changing settings on your 2Wire DSL router.

[ad_2]